[time-nuts] Parts (Mouser) for the PICTIC II
lists at rtty.us
Thu Jul 8 19:56:24 EDT 2010
Ok, It wasn't clear to me weather the 3/8" parts would fit on the layout in place of the 1/4" parts. The larger parts are indeed easier to get.
On Jul 8, 2010, at 7:26 PM, Richard H McCorkle wrote:
> Instead of the 3266 series go to the 3296 series
> 5K Trimmer, top adjust
> 652-3296W-1-502LF 7100 in stock
> 652-3296Y-1-502LF 590 in stock
> 200 Trimmer, top adjust
> 652-3296W-1-201LF 1090 in stock
> 652-3296Y-1-201LF 830 in stock
>> The real question somebody needs to answer is - will it work with side adjust
>> trimmers? If not, then we're going to have to find another source to get the
>> trimmers from.
>> The project on Mouser shows the 3266p trimmer. AFIK the correct part is the 3266w.
>> The board also appears to be laid out for the 3266y. Another alternative is the
>> 3266x. All the details of what's what are at:
>> My guess is that the 3266p isn't going to work. The 3266y is even harder to get
>> than the 3266w. The 3266x looks problematic when you go to do the adjustment
>> Rational solutions:
>> 1) Jameco shows the 3266w as "ships today" in 5 K ohms. Who knows how many they
>> actually have....
>> 2) 3266w is available in the 2K ohm flavor at Mouser (lots in stock). If you change
>> R16 and R23 to 1K ohms, the 2K pot should work fine. That makes them the same
>> value as R5 and R6. One fewer line item ...
>> I'd vote for option 2.
>> On Jul 8, 2010, at 2:55 PM, Lester Veenstra wrote:
>>> Safe to get in the water yet?
>>> Lester B Veenstra MØYCM K1YCM
>>> lester at veenstras.com
>>> m0ycm at veenstras.com
>>> k1ycm at veenstras.com
>>> US Postal Address:
>>> PSC 45 Box 781
>>> APO AE 09468 USA
>>> UK Postal Address:
>>> Dawn Cottage
>>> Norwood, Harrogate
>>> HG3 1SD, UK
>>> Office: +44-(0)1423-846-385
>>> Home: +44-(0)1943-880-963
>>> Guam Cell: +1-671-788-5654
>>> UK Cell: +44-(0)7716-298-224
>>> US Cell: +1-240-425-7335
>>> Jamaica: +1-876-352-7504
>>> This e-mail and any documents attached hereto contain confidential or
>>> privileged information. The information is intended to be for use only by
>>> the individual or entity to whom they are addressed. If you are not the
>>> intended recipient or the person responsible for delivering the e-mail to
>>> the intended recipient, be aware that any disclosure, copying, distribution
>>> or use of the contents of this e-mail or any documents attached hereto is
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts