[time-nuts] DCF77 clock with UTC display

[michael cook]

There are plenty of implementations hardware plus PIC/AVR code out there for a homebrew. For a long time I was using Conrads receiver with Jonathan Buzzards linux code to get a reasonable NTP reference. I switched to BSD with Oncore GPS since. 


Le 6 juin 2010 à 17:41, AL1 a écrit :

> 
> Hi Giuseppe,
> i remember that Elektor had such a description;
> but i don' know when, i am looking for it...
> Alain Bouchet
> F4GBC
> 
> ----- Original Message ----- From: "Giuseppe Marullo" <giuseppe at marullo.it>
> To: "Discussion of precise time and frequency measurement"
> <time-nuts at febo.com>
> Sent: Sunday, June 06, 2010 1:55 AM
> Subject: Re: [time-nuts] DCF77 clock with UTC display
> 
> 
>> 
>> >DCF77 is transmitted  in  CET/CEST and so receivers generally just
>> display the received data with some allowing other TZ offsets as it can be
>> received in the UK for example. I also lucked out when looking for one
>> where >daylight savings adjustments could be removed .
>> 
>> Mike,
>> exactly what I am experiencing. I am starting to believe that I will have
>> to ask to ham radio manifacturers (like MFJ but they are US based) until
>> they will develop a specific product, or I will have to build it myself,
>> like a DCF77 receiver with some ehm, custom handling of the summer time...
>> 
>> I can't believe there is no such need for aviation or other fields.
>> 
>> Giuseppe Marullo
>> 
>> 
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>> 
> 
> 
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>