[time-nuts] Hot Water Electronics

Brian Kirby kilodelta4foxmike at gmail.com
Mon Jun 7 02:06:05 UTC 2010


I agree, I run a ProLogix myself and I will recommend it.

John Miles wrote:
> You are always better off sticking with Prologix or NI interfaces, based on
> the software you want to run.
> 
> -- john, KE5FX
> 
>> -----Original Message-----
>> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]On
>> Behalf Of Brian Kirby
>> Sent: Sunday, June 06, 2010 2:34 PM
>> To: Discussion of precise time and frequency measurement
>> Subject: Re: [time-nuts] Hot Water Electronics
>>
>>
>> Some instruments can be put in a talk only mode and you will be able to
>> log the data.  Its a "dumb" mode, but it works.  If all you need is the
>> data....its good enough.
>>
>> I do not know anything about the PIC Plot device, no endorsement implied.
>>
>> Brian - KD4FM
>>
>> Joseph Gray wrote:
>>> I had seen that site before. As far as I can tell, that PIC Plot
>>> device is only good for sending data to a plotter/printer. It will not
>>> allow logging data from an instrument.
>>>
>>> Joe Gray
>>> W5JG
>>>
>>> On Sun, Jun 6, 2010 at 5:30 AM,  <GandalfG8 at aol.com> wrote:
>>>> Lovely name isn't it?:-)
>>>>
>>>> Existence of this site might be common knowledge, if so apologies for
>>>> wasting bandwidth, but I've not seen it before and it has a couple of
>>>> interesting looking GPIB interface projects plus a GPS
>> conditioned  oscillator...
>>>> _http://www.webalice.it/hotwater/OurProjects.htm_
>>>> (http://www.webalice.it/hotwater/OurProjects.htm)
>>>>
>>>> regards
>>>>
>>>> Nigel
>>>> GM8PZR
>>>> _______________________________________________
>>>> time-nuts mailing list -- time-nuts at febo.com
>>>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>>> and follow the instructions there.
>>>>
>>>>
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 




More information about the Time-nuts_lists.febo.com mailing list