[time-nuts] Datum TS-2100 firmware updating

[Richard W. Solomon]

Check the on-board battery. It may not be up to spec.

Good luck on changing it ... True-Time could not have 
made it more difficult.

73, Dick, W1KSZ


-----Original Message-----
>From: ernieperes at aol.com
>Sent: Jun 28, 2010 4:43 AM
>To: time-nuts at febo.com
>Subject: Re: [time-nuts] Datum TS-2100 firmware updating
>
>
>HI Julien,
>
>Do you have a detailed info, docu about the TrueTime  XL-DC??????
>
>I have 2ea of this unit and one is not going to lock.......
>Any experience or help appreciated.
>
>Rgds Ernie.
>
>
>
>
>
>
>
>-----Original Message-----
>From: Julien Goodwin <time-nuts at studio442.com.au>
>To: time-nuts at febo.com
>Sent: Mon, Jun 28, 2010 1:36 pm
>Subject: [time-nuts] Datum TS-2100 firmware updating
>
>
>As a first post I thought I'd share a success story.
>After a lot of flailing about the magic combination to upgrade a TS-2100
>rom old/ROM firmware appears to be to ensure the line endings on the
>ile match that of the TFTP host. While it is twitchy about ethernet as
>ong as there's no contention it's probably fine.
>Serial updates I just couldn't make work.
>Up next is to convert the darn thing to Rubidium, like it was meant to
>e when I purchased it (insert rant here).
>Other toys are a TrueTime XL-DC and Trimble Palisade, along with a
>rueTime IRIG-B display.
>Thanks,
>ulien
>_______________________________________________
>ime-nuts mailing list -- time-nuts at febo.com
>o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>nd follow the instructions there.
>
>_______________________________________________
>time-nuts mailing list -- time-nuts at febo.com
>To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.