[time-nuts] Fluke1 Monitor

[Richard W. Solomon]

Link does not seem to work ??

73, Dick, W1KSZ


-----Original Message-----
>From: EB4APL <eb4apl at cembreros.jazztel.es>
>Sent: Mar 19, 2010 7:47 PM
>To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
>Subject: Re: [time-nuts] Fluke1 Monitor
>
>Mark,
>
>Arthur Dent wrote in this list a couple of months ago:
>
>"The display is a HY-2002A-803    http://www.ciahk.net/upload/docs/HY-2002A.pdf"
>
>I'm going to include that info on my page.
>
>Also Christian Vogel told me today:
>
>"I'm fairly sure that testpad P5 will be connected to AtTiny26 pin 10
>(\RESET), because that's also used for programming. If that's indeed
>the case you'll be able to reprogram that tiny chip via standard AVR
>means."
>
>He is right, so I'll update the schematic and publish it in the next hours.
>
>Thank you all for the feedback.
>
>And if somebody wants to upload the info on my page into any widely used info page, feel free to do it without asking.
>
>Best regards
>Ignacio Cembreros
>
>
>-----------------------------------------------
>Mark Sims wrote:
>
>> Any idea what LCD controller chip the display uses?   Probably the Hitachi standard interface,  but different controller chips can have subtle differences...  		 	   		  
>> _________________________________________________________________
>> Hotmail: Trusted email with powerful SPAM protection.
>> http://clk.atdmt.com/GBL/go/210850553/direct/01/
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>>   
>
>
>_______________________________________________
>time-nuts mailing list -- time-nuts at febo.com
>To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.