[time-nuts] HP 5065A rubidium lifetime

paul swed paulswedb at gmail.com
Mon Mar 22 02:28:24 UTC 2010


Funny about coke and phosphoric acid
I guy showed me how well it cleaned the battery terminals of a .6MW
generator.
Had a pair of them with mighty nice terminals. :-)
Never forgot that trick. Did not realize it was the phosphoric acid.
But it tempered thirst for coke.

On Sun, Mar 21, 2010 at 7:00 PM, J. Forster <jfor at quik.com> wrote:

> Maybe Diet Coke or Coke Zero ??
>
> -John
>
> ==========
>
>
> [snip}
>
> > Legend has it you can solder stainless steel with Coca Cola, but the
> > sugar and caramel make that unlikely.
> > A compounding pharmacy may be able to sell you some.
> > I hope that that helps,
> > Cheers, Neville Michie
> >
> >
> >
> >
> > On 22/03/2010, at 7:43 AM, paul swed wrote:
> >
> >> Were do you obtain a small amount of phosphoric acid????
> >> Also when I looked it up they said it was H3PO4. Doesn't sound like
> >> the
> >> same.
> >> Is there a common use for it?
> >>
> >> On Sun, Mar 21, 2010 at 1:58 PM, randy hunt
> >> <randy_hunt960 at yahoo.com> wrote:
> >>
> >>> Try measuring a known length of the resistance wire, say 6 inches
> >>> and then
> >>> double. . .
> >>>
> >>> Randy
> >>>
> >>> Hi
> >>>
> >>> Next step would be to figure out what a reasonable ohms / foot number
> >>> is.
> >>>
> >>> Bob
> >>>
> >>>
> >>> On Mar 21, 2010, at 12:41 AM, Chuck Harris
> >>> wrote:
> >>>
> >>>> HP just wound two parallel wires around the cylinder.  They
> >>> did not
> >>>> twist.  The wires at the entrance end of the solenoid went to
> >>> the
> >>>> electronics, the wires at the exit end of the solenoid were
> >>> shorted
> >>>> together... I think they used a crimp for the short.
> >>>>
> >>>
> >>>> -Chuck Harris
> >>>>
> >>>> J. L. Trantham wrote:
> >>>>> Do you
> >>> make a 'twisted pair' and then wind that or just wind two parallel
> >>>>>
> >>> wires around the cylinder?
> >>>>> Joe
> >>>>
> >>>>
> >>> _______________________________________________
> >>>> time-nuts mailing list
> >>> -- time-nuts at febo.com
> >>>> To
> >>> unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/
> >>> time-nuts
> >>>>
> >>> and follow the instructions there.
> >>>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> time-nuts mailing
> >>> list -- time-nuts at febo.com
> >>> To
> >>> unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/
> >>> time-nuts
> >>> and
> >>> follow the instructions there.
> >>> _______________________________________________
> >>> time-nuts mailing list -- time-nuts at febo.com
> >>> To unsubscribe, go to
> >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> >>> and follow the instructions there.
> >>>
> >> _______________________________________________
> >> time-nuts mailing list -- time-nuts at febo.com
> >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/
> >> time-nuts
> >> and follow the instructions there.
> >
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
> >
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>



More information about the Time-nuts_lists.febo.com mailing list