[time-nuts] FE-5680 commands

[Magnus Danielson]

Dear Murray,

Murray Greenman wrote:
> Magnus,
> There's also the 'E<CR>' command which causes the current operating
> frequency to be stored for next time it powers up. I've set mine to
> 10MHz.
>
> I too would like to know about any hidden commands. Especially any fine
> trim commands.
>
> On the page www.qsl.net/zl1bpu/PROJ/Ruby.htm there's a list of the
> currently known commands, a collection of modification information, and
> also a PC program to download, which controls the FE-5650A and FE-5680A
> in an easy to use manner, where you dial in the frequency in Hz.
>
> These are great little units!
>   
Many thanks. I did not have that pointer on collected info, even if I 
have seen the parts floating around.

Cheers,
Magnus
> Regards,
> Murray Greenman ZL1BPU
>
>
> ------------------------------------------------------------------------
> -------
> Message: 8
> Date: Wed, 24 Mar 2010 23:18:12 +0100
> From: Magnus Danielson <magnus at rubidium.dyndns.org>
> Subject: [time-nuts] FEI FE-5680A
> To: Discussion of precise time and frequency measurement
> 	<time-nuts at febo.com>
> Message-ID: <4BAA8FA4.5040600 at rubidium.dyndns.org>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Fellow time-nuts,
>
> I am a curious mind, which should come as no big supprise, and I know 
> that lots of people have looked deeply into these devices before me.
>
> So, first of all I wonder, what other commands than S<Cr> and F=<32-bit 
> hex number><Cr> is there? Anything fun? Anything useful? Anything
> booring?
>
> Second, anything I should keep in mind as I power one up?
>
> Mine came with a little extra-gift. Need to take a photo of that. Very 
> neat. :)
>
> Cheers,
> Magnus
>
>
>
> ------------------------------
>
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
> End of time-nuts Digest, Vol 68, Issue 127
> ******************************************
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>