[time-nuts] Minor NTP Issue?
Jason Rabel
jason at extremeoverclocking.com
Mon Nov 1 20:01:50 UTC 2010
Poul-Henning & Russell,
Thanks for the inputs, and I'm pretty sure both of your responses are / could be attributing to the offset. Right now my GPS antenna
is mounted in a window and doesn't get the best view of the sky. After checking, each machine does think it is in a different
location (none of which are even close to right). Hopefully this weekend after the storms pass I can finally get around to mounting
my timing antenna outside where it will most definitely get a clear 360 view.
Interesting you mention 8 port switches... I have three of them in my network here... So yes that too could be a factor, I might
have to play around with the ports and see if that has any measurable effect.
Unfortunately I looked all through the TS2100 menus and couldn't find a compensation delay option, then I remember reading in the
latest firmware update they took that out... :( Maybe I'll email Greg Dowd and see why they did that or if there's some hidden way
to adjust it.
Thanks again for the help!
Jason
> Once you get below 1ms you need to pay attention to everything, including
> ethernet switches. For instance many 8 port switches consists of two
> five-port chips connected back to back. That means that the packet
> delay inside a group is lower than between groups etc.
> Not sure if you have checked this, but I have found that I can see
> 100us or more of delta if the dedicated clock has not done a position
> average run, or has bad position information set.
More information about the Time-nuts_lists.febo.com
mailing list