[time-nuts] Austron 2100F

[EB4APL]

In fact it seems that he is in Portugal.

Regards
Ignacio, EB4APL

El 22/10/2010 2:04, paul swed escribió:
> Antonio is in Italy and they do have loran still.
> I have seen the e's on mine and I believe you get that if you do not feed an
> external reference into it.
> Regards
>
> On Thu, Oct 21, 2010 at 6:55 PM, Chuck Harris<cfharris at erols.com>  wrote:
>
>> Are you sure that your Loran chain is still up?  In the US and
>> Canada, Loran has been decommissioned.
>>
>> -Chuck Harris
>>
>>
>> asmagal at fc.up.pt wrote:
>>
>>> Hello!
>>>
>>> After power up, my 2100F Loran-C receiver displays
>>> (E 1002048) followed by (E-20), as usually, but recently
>>> I have a trouble: after that the TRACKING led goes RED
>>> still and the display shows (- E - - - E).
>>> Running the test subroutines 1 to 4 everything seems
>>> to be OK but the fault persists.
>>> Entering the sequence (0, STATUS, 6) doesn't clear the
>>> error.
>>> Does someone knows how to make a deep reset for
>>> clearing all the errors?
>>>
>>> Thanks in advance.
>>> Antonio
>>> CT1TE
>>>
>>>
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to
>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>>>
>>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>