[time-nuts] 5370B airflow

swingbyte swingbyte at exemail.com.au
Sun Aug 21 13:53:15 UTC 2011


On 21/08/2011 6:42 PM, Heinzmann, Stefan (ALC NetworX GmbH) wrote:
> I obtained a 5370B with the "bad socket syndrome" and restored it to working order.
>
> I was wondering about the side panels, though. One of the side panels is perforated for airflow, the other isn't. My version of common sense would indicate that the perforated one would have to go on the left side, so that air pushed in by the fan on the right would have to travel through the instrument until it escapes on the left near the power transformer. On my box it was mounted on the right, allowing the air to escape directly beside the fan.
>
> Unfortunately, the manual was of no help with this, and despite thorough discussions about 5370B cooling in this list, I couldn't find an answer here, either. So what's the correct way of mounting the side panels?
>
> Thanks for your help!
>
> Cheers
> Stefan
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
You are correct the perforations should be on the left side.  There is 
an article about the design of the flow around the OCXO and out past the 
psu.

Tim




More information about the Time-nuts_lists.febo.com mailing list