[time-nuts] Ebay FE-5680A Rb I see the price has gone up for these

[Rex]

FWIW. I just hapened on this power supply in an ad. You might find a 
fixed voltage one somewhere cheaper, but the price seemed ok, so here it 
is for consideration...
http://www.mpja.com/email/12-13-11.asp?r=284759&s=2

Still need the 5 V somehow, so not a complete solution for the 5680A.


On 12/19/2011 3:06 PM, GandalfG8 at aol.com wrote:
> In a message dated 19/12/2011 22:27:22 GMT Standard Time, caf at omen.com
> writes:
>
> This  thing requires plenty of current to get started.
> My Tek CPS250 1.2 amp  output (A+B parallel) only gets 7.5 volts.
> Now to scrounge something a bit  bigger.
> ---------------------
> The 15 volts to pin 1 starts off needing to supply around 1.7 Amps,
> eventually falling to somewhere between 700 and 800 mA.
>
> Pin 4 always draws around 85 to 90 mA from its 5 volt supply.
>
> regards
>
> Nigel
> GM8PZR
>