[time-nuts] eBay Giveaway Vectron OCXOs

[Magnus Danielson]

On 12/23/2011 08:26 PM, SAIDJACK at aol.com wrote:
> Running it at 5V with a Ref out at 4.8V would seem too close. Maybe it's a
> 12V part?
>
> If nothing else this could be a very stable, ovenized 4.8V lab  reference
> source..
>
> Is anyone planning to monitor the aging/stability/noise of this  reference?

My guess would be for 12 V, but 5V would be one to try.

Measuring the frequency stability on 5V would be one thing to try.

Cheers,
Magnus

> bye,
> Said
>
>
> In a message dated 12/23/2011 07:28:34 Pacific Standard Time,
> danrae at verizon.net writes:
>
> Thanks  for all the responses.  A quick check before breakfast shows that
> mine would seem to be for 5 Volts since the power consumption at that
> input agrees with the data sheet referenced; the current peaks at 0.95 A
> warming up and 0.13 A warm.   Reference V out is 4.8  V.
>
> Dan
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.