[time-nuts] EMCO or KDI brand MLP-102 mixer data needed

J. Forster jfor at quikus.com
Tue Dec 27 22:18:15 UTC 2011


This might be useful:

http://www.microwaves101.com/encyclopedia/wherenow.cfm

Try calling the current owner of Engelman Microwave.

-John

===========


> I have a number of RF mixer modules mounted in junk microwave IF
> converter blocks. They are labeled "MLP-102" in either KDI or EMCO
> brands, circa mid-1980s date codes. I'm planning to use some for a
> project, but can't find any info or anything even close on these
> apparently obscure units. I have the pinout figured out from the
> boards, but no specifications. I need to know how they are at 1 GHz.
>
> The RF and LO ports are probably good to 1.5 GHz, with a DC coupled
> IF port. They were used to up/down convert an IF around 1.2 GHz
> from/to 70 MHz IF. They are packaged in those little rectangular
> metal cans like the common Mini-circuits SRA-1 style.
>
> Does anyone have info on these parts? Or on EMCO or KDI (same as the
> resistor company, I think) RF product lines?
>
> Ed
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>






More information about the Time-nuts_lists.febo.com mailing list