[time-nuts] SRS PRS10 problem

[Magnus Danielson]

On 02/16/2011 10:31 PM, paul swed wrote:
> Well a couple answers.
> If those are RB whiskers try the heat gun at 300 degrees on it for 15
> minutes. As Magnus suggests and I just tried for the first time. It actually
> worked and I recovered the rb lamp.

While the heat gun on the Rb lamp is a nice trick, the whiskers most 
likely is nothing but traditional tin whiskers. A bit of re-soldering to 
remove bad metal and replacement of burned transistor is where I would 
start.

Cheers,
Magnus