[time-nuts] PM6654

[EWKehren at aol.com]

Arthur, will check. Thanks   Bert
 
 
In a message dated 2/16/2011 2:24:12 P.M. Eastern Standard Time,  
golgarfrincham at yahoo.com writes:

"Just  became the owner of a PM6654 with a PM9691 OCXO."

+++++++++++++
The  oscillator isn’t that bad. The specs say less than
5x10E-10 per day after  48hrs warm-up.

If everything seems ok but it doesn’t count, check to  
See if the front inputs are connected. If there are 
Identical inputs  on the rear, they may be connected 
Instead. I got a good buy on a PM6654  with C input 
Because the owner thought it had problems and it was 
Just  that the front cables were disconnected.   

-Arthur




_______________________________________________
time-nuts mailing list  -- time-nuts at febo.com
To unsubscribe, go to  
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the  instructions there.