[time-nuts] Freq cal to 1ppm without GPSDO
Hal Murray
hmurray at megapathdsl.net
Thu Feb 17 08:00:44 UTC 2011
> Thanks to you and the others for your replies. After some more HF reception
> problems here, I have come to the same conclusion as you. I found an Oncore
> M12+ timing GPS is available pretty cheap from Hong Kong, so that's my plan.
Years ago, I remember smiling when I figured out that I could calibrate the
clock in a scope. Just trigger on a PPS signal, dial out the delay to about
1 second, then see where the next PPS signal actually is. (The scope was off
about 6 ppm.)
--
These are my opinions, not necessarily my employer's. I hate spam.
More information about the Time-nuts_lists.febo.com
mailing list