[time-nuts] My latest Net4501 NTP Server

[Joe S. Borovetz]

At 07:13 PM 2/23/2011, you wrote:
>I tested it before posting and it did work for me.  I'm no longer setup for
>doing this again though.   Your CF card should be able to boot (at least
>partially) in your PC assuming you're using a IDE <-> CF adapter like I
>had.  Try burning the image again.  If it still doesn't work and if another
>person can verify that it's not working, I'll take the image down till I can
>test it myself.

That may be the problem....I used a USB CF adapter. I will dig out my 
TAPR CF IDE card and try it.

Joe


>-