[time-nuts] LH v3.0 Beta and Z3816A Question

John Miles jmiles at pop.net
Tue Jan 18 22:49:02 UTC 2011


No, not at this time.  It would take a lot of hacking.

-- john, KE5FX

> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]On
> Behalf Of paul swed
> Sent: Tuesday, January 18, 2011 2:18 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question
>
>
> A quick question
> I thought lady heather was a Tbolt program only.
> Does it work with other GPSDP like the hp 3801 etc???
> Thanks
>
> On Tue, Jan 18, 2011 at 9:20 AM, J. L. Trantham <jltran at att.net> wrote:
>
> > The Z3816A responded to the command nicely.  I was also able to use the
> > command:
> >        *tst?
> > to reboot the receiver without having to turn off the Z3816A.  This was
> > using Symmetricom SatStat v5.0.  I have not tried with HP SatStat v4.2.
> >
> > Initially, the time was off by what appeared to be the leap second value
> > with a TFOM of 6.  Now it is back to a TFOM of 3 and the time appears
> > correct.
> >
> > Thanks,
> >
> > Joe
> >
> > -----Original Message-----
> > From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]On
> > Behalf Of J. L. Trantham
> > Sent: Tuesday, January 18, 2011 6:36 AM
> > To: 'Discussion of precise time and frequency measurement'
> > Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question
> >
> >
> > Michael,
> >
> > Thanks for the hint.  I've looked at that site a thousand times
> but never
> > found that hint until now.  I'll give it a try.
> >
> > Thanks again.
> >
> > Joe
> >
> > -----Original Message-----
> > From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> > Behalf Of cook michael
> > Sent: Tuesday, January 18, 2011 2:20 AM
> > To: time-nuts at febo.com
> > Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question
> >
> >
> > Le 18/01/2011 05:07, J. L. Trantham a écrit :
> > > An unrelated question.  My Z3816A reports GPS time.  I have looked but
> > > have not found a command to make it switch to UTC.  Does such a
> > > command exist? If so, what is it?
> > >
> > The command to do the same on the Z3801A might work with this
> box aswell.
> >
> > Using info from K8CU;
> > http://www.realhamradio.com/GPS_Frequency_Standard.htm
> >
> > Issue the command:
> >
> >    :diag:gps:utc?
> >
> > If it returns 0 you are in GPS mode; if 1 you are in UTC
> >
> > Use the command:
> >
> >    :diag:gps:utc 1
> >
> > followed by
> >
> >        :syst:pon
> >
> > to set it to UTC mode.  Some units have to be powered off to
> actually reset
> > to UTC depending on software version.
> >
> >
> >
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 9.0.872 / Virus Database: 271.1.1/3386 - Release Date: 01/17/11
> > 01:34:00
> >
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>





More information about the Time-nuts_lists.febo.com mailing list