[time-nuts] Frequency based on mobile services

Magnus Danielson magnus at rubidium.dyndns.org
Tue Jan 25 14:39:16 EST 2011


On 25/01/11 18:12, Bob Camp wrote:
> Hi
>
> Several of the "big guys" have tried this approach.
>
> The problem seems to be that you are at the mercy of the guy who is
> transmitting the signal. He may (or may not) be very good at keeping things
> running right. Regulations may (or may not) actually require him to lock his
> signal to GPS.
>
> A lot of these systems work just fine at>  1.0 x 10^-8 off frequency. You
> have to keep the slots lined up between them, but as long as everybody
> agrees on alignment, they keep running fine. There's a lot that you can get
> away with and still be providing a dial tone.

GSM and hence UMTS has 50 ppb requirements in the base station 
frequency. For GSM no timing is required, but synchronisation of several 
base-stations has been shown to improve hand-over performance.
Depending on the operator you tune in to, it may or may not be locked to 
GPS or similar... but may also run from caesium beams somewhere 
completely different, if so you are only guaranteed 1E-11 in frequency 
long-term.

There is many systems, and you also need to tune in to the right signal. 
GSM for instance may frequency jump regularly.

Digital TV signals may be also be used. Depending on which mode the 
network operate in the transmitters may be undisciplined or locked to 
GPS directly or indirectly. DVB-T for instance has regular pilot-tones 
in the spectrum. A DVB-T receiver is a nice exercise... :)

It's possible, but not trivial.

Cheers,
Magnus




More information about the time-nuts mailing list