[time-nuts] Mass vs BTU Function
Jim Lux
jimlux at earthlink.net
Thu Jan 27 21:14:36 UTC 2011
Most metals have a specific heat around .34, where water is 1.0. ( so .34 BTU to raise a pound od aluminum by 1 deg F)
The have different densities, so on a per volume basis, you want dense. Tungsten for instance or osmium
You also need to consider conductivity though. Gold is good
On Jan 27, 2011, at 3:38 PM, Perry Sandeen <sandeenpa at yahoo.com> wrote:
> List,
>
> Please help me with this physics question.
>
> If one has a given cube, say 2 x 2 x 2 inches. And one has the choice of aluminum, copper, or lead (just for an example). Will each store or hold the same amount of BTUs or does the density make a difference?
>
> IF the density makes a difference, can someone give me the approximate difference?
>
> The practical end of this question is consideration of thermal mass surrounding an oscillator,
>
> TIA
>
> Perrier
>
>
>
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list