[time-nuts] Frequency standards for characterizing GPSDO's ?
Mark Spencer
mspencer12345 at yahoo.ca
Sun Jan 30 17:13:31 UTC 2011
Interesting thanks. Getting a Rubidium standard that is progamable makes
sense.
I've seen a number of references to the PICTIC II, are the circut boards still
avaliable ?
Best regards
Mark Spencer
----- Original Message ----
From: Magnus Danielson <magnus at rubidium.dyndns.org>
To: time-nuts at febo.com
Sent: Sat, January 29, 2011 12:51:43 PM
Subject: Re: [time-nuts] Frequency standards for characterizing GPSDO's ?
On 29/01/11 20:53, Mark Spencer wrote:
> Greetings I'm looking suggestions for a frequency standard for characterizing
> GPSDO's. I've got one 10811 (out of 3) that seems to be stable enough to be
> able to use as a frequency reference to draw conclusions about GPSDO
>performance
> using a 5370B counter in time interval mode. (It typically takes
> several thousand seconds for a phase wrap to occur.) I'm contemplating
> acquiring a Rubidium standard as a next step and would be interested in any
> opinions as logical next steps.
Consider a PICTIC II and a FEI rubidium (or compatible from Temex). Toss a
processor of choice to take the PICTIC II data, implement a PI-regulator and
then steer the rubidium over the serial interface.
For best system design one would need four serial interfaces (GPS, rubidium,
PICTIC II and supervision). Would be a rather neat solution.
Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list