[time-nuts] TBolt question: Osc Age Alarm

Bob Camp lists at rtty.us
Tue Jul 19 16:04:36 UTC 2011


Hi

I would agree that it's a limit alarm - except, I've seen the alarm come on
when the DAC was at 0.5V.

Bob

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Mark Sims
Sent: Tuesday, July 19, 2011 8:35 AM
To: time-nuts at febo.com
Subject: [time-nuts] TBolt question: Osc Age Alarm


The OSC AGE ALARM is a minor alarm that indicates the oscillator control
voltage is near its minimum or maximum value. The manual indicates that if
this happens the oscillator will probably be at its control limit within two
years.  The tbolt firmware does not attempt to estimate  the oscillator
aging rate.  The alarm is based only upon the control voltage value.
Once the oscillator control voltage reaches its limit,  the major OSC: BAD
alarm is signaled. 		 	   		  
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.





More information about the Time-nuts_lists.febo.com mailing list