[time-nuts] Replacing electrolytics - any disadvantages of high temp ones?

Alan Melia alan.melia at btinternet.com
Fri Jun 24 18:32:47 UTC 2011


Hi Brooke that is only the last of about 5 or 6 articles in the same journal
you need to find the others as well. Cyril used to work for one of the big
UK manufacturers I believe. I think I still have the paper copies  of E&WW
somewhere.

Alan
G3NYK
----- Original Message ----- 
From: "Brooke Clarke" <brooke at pacific.net>
To: "Discussion of precise time and frequency measurement"
<time-nuts at febo.com>
Sent: Friday, June 24, 2011 7:22 PM
Subject: Re: [time-nuts] Replacing electrolytics - any disadvantages of high
temp ones?


> Hi Chad:
>
> Google found it:
> http://techdoc.kvindesland.no/radio/passivecomp/20061223155312558.pdf
> But it's not that informative.
>
> The best info I've seen on measuring components is the HP (Agilent)
> Impedance Handbook.
> http://cp.literature.agilent.com/litweb/pdf/5950-3000.pdf
>
> I measured dozens of caps using a number of different methods to see how
> well the combined ESR and Capacitance meter I sell works.
> http://www.prc68.com/I/ESRmicro.shtml
> http://www.prc68.com/I/Capacitors.shtml
>
> Does anyone know of a modern cap leakage tester?
>
> Have Fun,
>
> Brooke Clarke
> http://www.PRC68.com
>
>
> GMail / AnalogAficionado wrote:
> > Cyril Bateman called Understanding Capacitors
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.





More information about the Time-nuts_lists.febo.com mailing list