[time-nuts] latest on the lightsquared 'saga'

[Mike Feher]

That sounds neat. My recollection of SAW filters from many moons ago is that
they have a fair amount of insertion loss. One always has to consider
trade-offs. Do you know if it is placed after the antenna and before the
LNA, or, is it after the LNA? Also, you probably meant -159 dBm of
sensitivity, and, I expect that is on a one Hz basis. 73 - Mike 

Mike B. Feher, EOZ Inc.
89 Arnold Blvd.
Howell, NJ, 07731
732-886-5960 office
908-902-3831 cell

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Matt Osborn
Sent: Monday, March 07, 2011 2:59 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] latest on the lightsquared 'saga'

iLotus has the new TX Oncore timing receiver with a built in saw
filter and -159db sensitivity.  Has anyone had a chance to put it
through its paces?

-- kc0ukk at msosborn dot com

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.