[time-nuts] Symmetricom TimeSource 2700
Charles P. Steinmetz
charles_steinmetz at lavabit.com
Thu Nov 24 20:44:32 UTC 2011
Kevin wrote:
>reading more about the TL1 messages from the Craft
>output, there are messages for date and time:
>
>date:
>This parameter is the current date in the
>8-digit form yyyy-mm-dd, where yyyy is year, mm
>is month (0112), and dd is day (0131).
>
>time:
>This parameter is the current time in the
>6-digit form hh-mm-ss where hh is hours (023),
>mm is minutes (059), and ss is seconds (059).
>The factory setting is GMT for local time.
Right. However, the manual does not say that
these are sent regularly (every second, or
whatever). Note that "date" and "time" are both
reported as parameters in each Alarm and Event
message. So are "ocrdat" and "ocrtm" (date and
time, respectively, when the event occurred).
The Craft output feeds a PC Com port -- I'd think
that reading the Com port with a terminal
emulator should verify whether the "date" and
"time" events are sent regularly, or only with Alarms or Events.
Best regards,
Charles
More information about the Time-nuts_lists.febo.com
mailing list