[time-nuts] Looking for a Counter

Roy Phillips phill.r1 at btinternet.com
Sat Oct 8 11:43:12 EDT 2011


Chuck
If you failed to get the Racal - don't worry, the HP is a better product 
without all that aggravation that comes with doubts about the front panel 
buttons that frequently fail, and the symbols that wear off.  The HP 5334A 
or B are a better bet, and the 5445A even better, if you can accept the 
additional size and fan noise. I intend replacing the fan in my 5335A with a 
12 volt substitute.  Its just the hassle of finding a 12 volt  300mA ? 
source within the instrument.
Good luck
Roy


---------------------------------------------
From: "Chuck Forsberg WA7KGX N2469R"
<caf at omen.com>


Sent: Friday, October 07, 2011 4:24 AM
To: "Discussion of precise time and frequency measurement" 
<time-nuts at febo.com>
Subject: Re: [time-nuts] Looking for a Counter

> Thanks for the input.
> After reading your comments I placed a bid for a Racal.
> Chances I will be outbid but nothing ventured....
>
> -- 
> Chuck Forsberg WA7KGX N2469R     caf at omen.com   www.omen.com
> Developer of Industrial ZMODEM(Tm) for Embedded Applications
>   Omen Technology Inc      "The High Reliability Software"
> 10255 NW Old Cornelius Pass Portland OR 97231   503-614-0430
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 





More information about the time-nuts mailing list