[time-nuts] HP5370B - Err 02
John Miles
jmiles at pop.net
Tue Oct 25 21:28:57 UTC 2011
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-
> bounces at febo.com] On Behalf Of Bob Smither
> Sent: Tuesday, October 25, 2011 1:46 PM
> To: Discussion of precise time and frequency measurement
> Subject: [time-nuts] HP5370B - Err 02
>
> I have an HP5370B that is measuring the time interval between two 1 pps
> signals. Occasionally, like every few days, I will look over and the
> unit is displaying "Err 02."
>
> The unit is set to display the average of 10,000 events. It will go for
> days, updating the interval as expected, but then show the error
> message. A Reset returns it to normal operaion.
>
> I could not find a list of the error codes in the manuals that I have.
>
> Does anyone know what my 5370B is trying to tell me?
Sounds like one of your 1-pps sources is dropping out for long periods of
time, presumably the one connected to the STOP channel. If it receives a
START trigger but no STOP trigger within 10 seconds or thereabouts, it will
give you an Err 02.
The list of error codes is on page 3-4 of David Kirkby's scan (available on
agilent.com).
-- john
More information about the Time-nuts_lists.febo.com
mailing list