[time-nuts] PICTIC II ready-made?

[EWKehren at aol.com]

The Altera Max 3000A as I mentioned before will do all TTL devices, it has  
an extensive library easy to use and very cheap. All That at 200 MHz. I 
became a  believer and others I introduced to it love it to. In an hour from 
downloading  the free software you can have your first design. If I can do it 
every body can  do it.  
Bert Kehren
 
 
In a message dated 4/27/2012 9:53:16 A.M. Eastern Daylight Time,  
attila at kinali.ch writes:

On Wed,  25 Apr 2012 19:17:43 -0300
Daniel Mendes <dmendesf at gmail.com>  wrote:

> About replacing the 74ACT175... there´s a company called  "Potato Semi" 
> (well.. they make "chips", right?) whose sole business  is to make damn 
> fast 74 logic. Their chips can be bought at ebay in  small quantities. 
> Look at this 600MHz D flip flop:
> 
>  http://www.potatosemi.com/potatosemiweb/datasheet/PO74G74A.pdf

Hmm...  looks interesting. Though, i probably would take
standard ECL instead of  those because of higher availability
(you can get them from mouser, digikey  & co).

But good to know that at least someone is still trying to  improve
standard 74xx devices, for all those who do not want to use an  CPLD/FPGA.


Attila  Kinali


-- 
The trouble with you, Shev, is you don't say anything  until you've saved
up a whole truckload of damned heavy brick arguments and  then you dump
them all out and never look at the bleeding body mangled  beneath the heap
-- Tirin, The Dispossessed, U.  Le Guin

_______________________________________________
time-nuts  mailing list -- time-nuts at febo.com
To unsubscribe, go to  
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the  instructions there.