[time-nuts] PICTIC II ready-made?

[cfo]

On Fri, 27 Apr 2012 12:03:20 -0700, Jerry Mulchin wrote:

> You might want to take a look at the Atmel XMEGA parts. Far more
> capabilities than the ATMega parts.
> 
Watch out .....

If using an Xmega make sure to select the "U" ... Usb ones.
Most of the non U parts have an errata list longer than the datasheet , 
and in the analog domain they have serious flaws.

But going there (smd only) i'd select an arm instead.

CFO