[time-nuts] HP 10811D question
Christopher Brown
cbrown at woods.net
Sat Apr 28 20:30:02 UTC 2012
Thanks for the cross-check (and the links)!
The 5091-1639E.pdf datasheet was the piece I was missing. The only D/E
docs I had found were advert and per -XXXX sub model stability specs.
No pinout, voltage, schema info.
On 4/28/12 4:31 AM, Azelio Boriani wrote:
> By checking the 10811A/B manual and the 10811D/E specifications they are
> perfectly equal. Pinout is the same as can be seen here
>
> http://www.qsl.net/d/dk7nt/cro/download/5091-1639E.pdf
>
> compared with
>
> www.hparchive.com/Manuals/HP-10811AB-Manual.pdf
>
> On Sat, Apr 28, 2012 at 11:19 AM, Christopher Brown <cbrown at woods.net>wrote:
>
>>
>> I have a 5370B with a -60111, and a 5335 with a dead 10544.
>>
>> I also have a 10811D sitting on the desk.
>>
>>
>> I have been through the 10811A/B manual, and what looks like an
>> extension for the D/E and various -XXX versions.
>>
>> It looks to me like the D is a drop in replacement for the A, but did
>> not see anything specific on that point.
>>
>> Was thinking of moving to -60111 to the 5335 and installing the 10811D
>> in the 5370B.
>>
>>
>> Is the D a drop in?
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list