[time-nuts] HP 58503A
dekagoon at gmail.com
Fri Aug 3 08:40:46 EDT 2012
Peter Bell <bell.peter at ...> writes:
> If it is, then you should see a pulse every 2 seconds, lined up with the
> even seconds in GPS time. This might seem a rather strange signal to
> provide, but it's what the IS-95 derived CDMA systems use to trigger the
> start of another 100 block signalling frame. It also tends to suggest that
> the unit you have was originally being used as part of a CDMA system.
I snapped on the osci probe and see no 1 PPS or 2 PPS signal.
It seems like a noise signal with several positive and negative spikes with an
peak to peak value of 50 to 60 mV...
Next is to analyze the rest with a logicprobe but the signal level seems to be
too small for beeing a logic signal...
TTL should be at 15 V, CMOS 5 V... but 50 mV ?
More information about the time-nuts