[time-nuts] Modern motherboard with RS232 port
Christopher Brown
cbrown at woods.net
Sun Aug 19 19:55:14 UTC 2012
I stand corrected, shows what I get for listening to a UPS vendors
documentation.
On 8/19/12 11:52 AM, Tom Miller wrote:
> No it is not.
>
>
> VA * PF = W for VA = volt amps, PF = power factor, W = watts (or true power)
>
> PF = the cos of the phase angle between the current and the voltage
> (assuming both are sine waves)
>
> +++++++++
>
> Peak Volts * 0.707 = RMS volts, again for sine waves only.
>
> +++++++++
>
>
> ----- Original Message -----
> From: "Christopher Brown" <cbrown at woods.net>
> To: <time-nuts at febo.com>
> Sent: Sunday, August 19, 2012 3:38 PM
> Subject: Re: [time-nuts] Modern motherboard with RS232 port
>
>
> Converting VA to W is same as converting peak V to RMS V.
>
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
More information about the Time-nuts_lists.febo.com
mailing list