[time-nuts] Fwd: Re: Lucent GPS and RB pair

Peter Bell bell.peter at gmail.com
Tue Aug 21 06:56:17 UTC 2012


The software is on ko4bb's site:

http://www.ko4bb.com/manuals/index.php?dir=05%29_GPS_Timing/RFTG-m

Regards,

Pete


On Tue, Aug 21, 2012 at 12:35 AM, Randy D. Hunt <randy_hunt960 at yahoo.com>wrote:

>
>
>
> -------- Original Message --------
> Subject:        Re: [time-nuts] Lucent GPS and RB pair
> Date:   Mon, 20 Aug 2012 10:00:29 -0700
> From:   Randy D. Hunt <randy_hunt960 at yahoo.com>
> To:     Discussion of precise time and frequency measurement <
> time-nuts at febo.com>
>
>
>
>
> On 8/20/2012 9:09 AM, paul swed wrote:
>
>> Asking the wrong guy.
>> No clue
>> Regards
>> Paul
>>
>> On Sun, Aug 19, 2012 at 11:09 PM, Tom Knox <actast at hotmail.com> wrote:
>>
>>  Hi Paul;
>>> Has anyone played with these Lucent units much to see if LH could be
>>> tweaked to work?
>>> Thanks;
>>> Thomas Knox
>>>
>>>
>>>
>>>  Date: Sun, 19 Aug 2012 22:44:38 -0400
>>>> From: paulswedb at gmail.com
>>>> To: time-nuts at febo.com
>>>> Subject: Re: [time-nuts] Lucent GPS and RB pair
>>>>
>>>> Boy do I agree with Bobs comment.
>>>> But I have several of the lucent RBs and at least most of mine are quite
>>>> old. Hey $20 you can't really argue. Or as they say you get what you pay
>>>> for.
>>>> So reasonable is a curious question. Or a caution.
>>>> By the way I am not at all complaining actually.
>>>> Regards
>>>> Paul.
>>>> WB8TSL
>>>>
>>>>
>>>> On Sun, Aug 19, 2012 at 9:13 PM, Bob Camp <lists at rtty.us> wrote:
>>>>
>>>>  Hi
>>>>>
>>>>> Compared to the other two, there is a lot less support for the RFTG
>>>>>
>>>> parts.
>>>
>>>> Lady Heather is a *very* good reason to use a TBolt.
>>>>>
>>>>> Bob
>>>>>
>>>>> On Aug 19, 2012, at 9:06 PM, Jerry <jsternmd at att.net> wrote:
>>>>>
>>>>>  Hi,
>>>>>>
>>>>>> I am looking for opinions on the RFT Gm II- XO and RFT Gm II- RB
>>>>>>
>>>>> combination
>>>>>
>>>>>> compared to TBolt or HP 3815A.  I can get the Lucent pair at a very
>>>>>> reasonable price.  Are manuals easily obtained for them?
>>>>>>
>>>>>> Thanks
>>>>>> Jerry
>>>>>> K1JOS
>>>>>> ______________________________**_________________
>>>>>> time-nuts mailing list -- time-nuts at febo.com
>>>>>> To unsubscribe, go to
>>>>>>
>>>>> https://www.febo.com/cgi-bin/**mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
>>>>>
>>>>>> and follow the instructions there.
>>>>>>
>>>>>
>>>>> ______________________________**_________________
>>>>> time-nuts mailing list -- time-nuts at febo.com
>>>>> To unsubscribe, go to
>>>>> https://www.febo.com/cgi-bin/**mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
>>>>> and follow the instructions there.
>>>>>
>>>>>  ______________________________**_________________
>>>> time-nuts mailing list -- time-nuts at febo.com
>>>> To unsubscribe, go to
>>>>
>>> https://www.febo.com/cgi-bin/**mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
>>>
>>>> and follow the instructions there.
>>>>
>>> ______________________________**_________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to
>>> https://www.febo.com/cgi-bin/**mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
>>> and follow the instructions there.
>>>
>>>  ______________________________**_________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/**
>> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
>> and follow the instructions there.
>>
>>  list:
>
> I don't know about LH.  But the Lucent software is out there. It just
> takes some searching to find it.  I have it around here somewhere.  I
> moved in Feb and still have not got the bench set up. There is some
> documentation out there too.  Just takes some hunting to find it. Check
> to archives of this list for a lot of it.  I have a pair that that had
> been running 24x7 for about 9 months. no problems.  Hope this helps.
>
> Randy, KI6WAS
>
>
>
>
>
> ______________________________**_________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/**
> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
> and follow the instructions there.
>



More information about the Time-nuts_lists.febo.com mailing list