[time-nuts] HP-5065a bought and finally working!
xe1xus at amsat.org
Fri Aug 24 16:36:46 EDT 2012
Wow! The TimePod is a beauty. I wrote to John Miles regarding payment options and ordering instructions. Not planning to buy one at that price soon, but better be safe than sorry. What a nice piece of equipment.
Are all of you guys obtaining your graphical information and Allan Dev information using TimePod exclusively? Sorry to sound newbie on these matters. I am planning to take the plunge to full depth, you will see.
In the mean time, are there other generic or home made solutions for measuring? I only have the following in my "arsenal wanna be":
Oscilloscope. Digital 100Mhz 2 channels (Siglent)
Oscilloscope. Analogue 20Mhz 2 channels (Goldstar)
Bench multimeter digital (HP)
Frequency counter 10Hz to 1GHz (Sencore)
Frequency counter 10Hz to 20GHz (HP)
Signal generator synthesiser up to 60Mhz (HP)
Signal Hound Spectrum Analyser up to 4Ghz
Multiple other gadgets with lesser quality not worth mentioning
Could there be software and SDR, USB connected kits solutions to play around while saving for a TimePod?
T : 55 55 55202444
M : 04455 20501854
Piensa en Bits SA de CV
CONFIDENCIALIDAD DE INFORMACION
Este mensaje tiene carácter confidencial. Si usted no es el destinarario de este mensaje, le suplicamos se lo notifique al remitente mediante un correo electrónico y que borre el presente mensaje y sus anexos de su computadora sin retener una copia de los mismos. Queda estrictamente prohibido copiar este mensaje o hacer usode el para cualquier propósito o divulgar su en forma parcial o total su contenido. Gracias.
NON-DISCLOSURE OF INFORMATION
This email is strictly confidential and may also be privileged. If you are not the intended recipient please immediately advise the sender by replying to this e-mail and then deleting the message and its attachments from your computer without keeping a copy. It is strictly forbidden to copy it or use it for any purpose or disclose its contents to any third party. Thank you.
On Aug 22, 2012, at 4:43 AM, Azelio Boriani <azelio.boriani at screen.it> wrote:
> I think that it is the time for you to look at the TimePod: the TimePod can
> help you with Allan Deviation and phase noise measurement, the next step
> after clocks is measuring equipment and the TimePod is a sort of all-in-one
> for time-nuts, its place is right after the bench yellow multimeter.
> On Wed, Aug 22, 2012 at 9:03 AM, Chuck Forsberg WA7KGX N2469R
> <caf at omen.com>wrote:
>> If it is a really good Rb standard, consider adjusting the
>> standard yourself by measuring the phase over several
>> days once the standard has warmed up and settled down.
>> A GPIB counter with phase measurement is useful for this.
>> Chuck Forsberg WA7KGX N2469R caf at omen.com www.omen.com
>> Developer of Industrial ZMODEM(Tm) for Embedded Applications
>> Omen Technology Inc "The High Reliability Software"
>> 10255 NW Old Cornelius Pass Portland OR 97231 503-614-0430
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> and follow the instructions there.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts