[time-nuts] newbie question Thunderbolt supply
Bob Camp
lists at rtty.us
Sat Aug 25 20:10:18 UTC 2012
Hi
As long as the +12 is stable a few percent isn't going to hurt anything. The -12 can be off by a few volts and everything will be fine.
Bob
On Aug 25, 2012, at 4:06 PM, "Jerry" <jsternmd at att.net> wrote:
> I am using a Cisco supply 3 voltage supply for the T-bolt. Is there any
> performance loss if the +12vdc rail and the -12vdc rail are off by a few %
> in opposite directions, e,g +11.7 vdc and -12.3vdc ?
>
> Tia
> Jerry
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list