[time-nuts] Wireless Mesh Network Time Server

Joseph Gray jgray at zianet.com
Mon Aug 27 13:48:53 EDT 2012


If the article is accurate, then it's not a real time server, pushing
out the time at regular intervals.

I started on a similar project, using GPSD and NTPD on a WRT54G. I had
problems getting all the various modules to cooperate on OpenWRT. I'll
revisit the project when I have time and see if I can't make it all
play nice.

Joe Gray
W5JG

On Mon, Aug 27, 2012 at 10:01 AM, Bill Hawkins <bill at iaxs.net> wrote:
> Apparently the synchronization requirements are within a few seconds.
>
> Wireless mesh process value transmitters have taken over the process
> control industry. Some users require millisecond accuracy for the time
> stamp on any alarm of event messages the device may send. Seems like
> that would be a challenge for a reconfigurable network.
>
> Bill Hawkins
>
> -----Original Message-----
> From: Raj
> Sent: Monday, August 27, 2012 10:18 AM
>
> From Elektor, Sept. 2012
>
> https://dl.dropbox.com/u/10377704/Mesh%20EE.jpg
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>




More information about the time-nuts mailing list