[time-nuts] Z3805A cooling requirements?
SAIDJACK at aol.com
SAIDJACK at aol.com
Thu Dec 20 02:28:15 UTC 2012
Bob,
I did the test with my 53132A as a fan blowing on the 10811 after removing
the shielding and letting it stabilize first. The rate of flow from the
counter is actually not very strong, but the effects are massive.
Attached are the results, and they speak for themselves. There is an ADEV
plot with the unit inside the foil insulation without airflow showing a
very nice 1E-012 to 2E-012 stability all the way up to 100s, then the ADEV
with airflow on the unit, as well as 10 minutes worth of frequency plot while
inside the airflow. The ADEV is about 10x worse at around 100s and pretty
much goes straight up at intervals greater than 2 seconds.
This result is in line with our DOCXO oven tests we had done some years
ago. QED.
bye,
Said
In a message dated 12/19/2012 16:48:44 Pacific Standard Time, lists at rtty.us
writes:
Hi
Ok, what happens if you keep the air gun in the exact same position and
let it stabilize for an hour with no insulation around the OCXO ?
Bob
-------------- next part --------------
A non-text attachment was scrubbed...
Name: temp.zip
Type: application/zip
Size: 40243 bytes
Desc: not available
URL: <http://febo.com/pipermail/time-nuts_lists.febo.com/attachments/20121219/cd4323cb/attachment.zip>
More information about the Time-nuts_lists.febo.com
mailing list