[time-nuts] 8051 with RTC

[shalimr9 at gmail.com]

Said,

I can give you C code for a Silabs 8051 driving an I2C RTC in bit-banging mode (works with ANY chip)

Didier KO4BB


Sent from my BlackBerry Wireless thingy while I do other things...

-----Original Message-----
From: SAIDJACK at aol.com
Sender: time-nuts-bounces at febo.com
Date: Tue, 28 Feb 2012 20:49:43 
To: <time-nuts at febo.com>
Reply-To: Discussion of precise time and frequency measurement
	<time-nuts at febo.com>
Subject: Re: [time-nuts] 8051 with RTC

Cool!
 
That part looks like it will do the job, thanks very much Eric.
 
On the I2C driver, I ported the NXP I2C library from 8051 to NXP ARM a  
very long time ago, it was quite a bit of work to make it work properly. Lot's  
of bugs I had to fix.. and could only do that with a Philips I2C analyzer.
 
Not something I would want to do again..
 
bye,
Said
 
 
In a message dated 2/28/2012 13:39:44 Pacific Standard Time,  
garnere at gmail.com writes:

Silicon  labs might have what you are looking  for:
http://www.silabs.com/products/mcu/lowpower/Pages/C8051F96x.aspx

-Eric


_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.