[time-nuts] Navsync CW-12 GPS Board - I don't believe it!!
Azelio Boriani
azelio.boriani at screen.it
Wed Jan 4 21:56:40 UTC 2012
It depends on the option ordered: the FTS125s we have are FTS125-COO
(double OCXO) the -CTV option is the TCXO/VCXO option, there is the -COV
option too.
On Wed, Jan 4, 2012 at 10:08 PM, <SAIDJACK at aol.com> wrote:
> Hi Ed,
>
> sorry to hear that, contact me off-list and I will try to solve your
> problem. I tried sending you an email, but my mails must be getting
> filtered by
> your spam filter..
>
> bye,
> Said
>
>
> In a message dated 1/4/2012 11:33:14 Pacific Standard Time,
> ed_palmer at sasktel.net writes:
>
> On 1/4/2012 11:13 AM, Said Jackson wrote:
> > Hi Ed,
> >
> > Since the oscillator is typically free-running in an NCO, and
> periodically corrected by phase drops to stay "on frequency" the error
> you are seeing
> may be caused be the offset in your crystal, combined with the limited
> digital resolution of the NCO trying to correct for this offset.
> >
> > If this is the case, your measured error would change with temperature.
> >
> > Does it do that?
>
> Yes, it does. Cooling the unit by using a heatsink causes a significant
> increase in the output frequency. The change is large enough to be
> obvious on an oscilloscope where one channel is the 10 MHz from the
> Z3801A and the other channel is the 10 MHz from the CW12.
>
> > If yes, the NCO resolution is not fractionally corrected all the way.
> Replacing the on board Tcxo with an ocxo hand-tuned to the correct
> frequency
> would help, but that sort of defeats the purpose of the product..
>
> Yes, it appears that the CW12 is just not appropriate for what I was
> thinking of doing. However, to be fair, the 1 PPS output is much better
> than the older receivers. I'll have to think about where I go from here.
>
> Ed
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
More information about the Time-nuts_lists.febo.com
mailing list