[time-nuts] FE-5680A dumb question...

[Brian, WA1ZMS]

Thank you though. Got it working fine thanks to all the answers and help!

-Brian, WA1ZMS


-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of gonzo .
Sent: Wednesday, January 04, 2012 2:18 AM
To: time-nuts
Subject: Re: [time-nuts] FE-5680A dumb question...


Hi Brian.
Taking the list concensus and confirming it on my recently arrived '5680A,
the pinout is as follows:

1. +15V  (1500mA cold: 800mA hot)
2. Gnd
3. Rb Lock (lock = low)
4. +5V  (~85mA)
5. Gnd
6. 1PPS  (high until Rb Lock goes low)
7. 10Mhz
8. RS323-RX
9. RS232-TX

These pinouts are not consistant across the FE-5680A range, but seems good
for the 'current batch' of cheap units coming out of china.

Cheers,
ian


> Date: Tue, 3 Jan 2012 20:58:10 -0500
> From: "Brian, WA1ZMS" <wa1zms at att.net>
> To: "Time-Nuts" <time-nuts at febo.com>
> Subject: [time-nuts] FE-5680A dumb question...
> Message-ID: <000001ccca84$4ff2d570$efd88050$@att.net>
> Content-Type: text/plain;	charset="us-ascii"
> 
> My E-bay FE-5680A finally arrived. (4weeks later)
> 
>  
> 
> Of the pins on the DB-9 connector, which one is the RF output?
> 
> The manual only talks about an SMA output.
> 
>  
> 
> I know this has been talked about before, but I cannot find the thread.
> 
>  
> 
> Thanks in advance & sorry for bandwidth,
> 
> -Brian, WA1ZMS

 		 	   		  
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.