[time-nuts] Thermal insulation choice?
Joe Gwinn
joegwinn at comcast.net
Sat Jan 7 00:08:18 UTC 2012
At 10:15 PM +0000 1/6/12, time-nuts-request at febo.com wrote:
>Date: Fri, 06 Jan 2012 14:41:13 -0600
>From: David <davidwhess at gmail.com>
>To: Discussion of precise time and frequency measurement
> <time-nuts at febo.com>
>Subject: Re: [time-nuts] Thermal insulation choice?
>Message-ID: <lrmeg7118lvondacu922olu8spb57je2gq at 4ax.com>
>Content-Type: text/plain; charset=us-ascii
>
>I completely forgot about those two. [Balsa wood and foam-in=place
>urethane foam]
>
>I have a good local hobby shop
>with large pieces of balsa wood but I suspect it would be more
>expensive than good quality expanded polystyrene bead sheet. I will
>have to check out foam board next time. Both would be more difficult
>to cut without a hot wire knife.
Balsa wood cuts very easily with a sharp knife, glues very well with
carpenters' glue, and will not degrade over time.
Joe Gwinn
More information about the Time-nuts_lists.febo.com
mailing list