[time-nuts] FE-5680A Mechanical Question

EWKehren at aol.com EWKehren at aol.com
Thu Jan 12 18:57:37 EST 2012


Nigel 
I did not program it, it had its original setting and it is 9.99999999944  
which is -5.6 E-11, within 10 MHz which is within spec. Once I have some 
aging I  will look at Voltage sensetivity.
Bert Kehren
 
 
In a message dated 1/12/2012 6:22:02 P.M. Eastern Standard Time,  
GandalfG8 at aol.com writes:

Hi  Bert

Could you clarify something for me please, before you started your  tests  
did you program the unit to be close to 10MHz or did you leave  it as 
received,  and if so what is the actual frequency and is it  stable?

regards

Nigel
GM8PZR


In a message dated  12/01/2012 21:50:28 GMT Standard Time, EWKehren at aol.com 
  
writes:

I hear  all these ideas from paper tigers. How about  building something 
and 

report on it. I can do a Shera for $ 40  and add a $ 20 GPS.  And it  
works. 
I did fail to mention that I  also have retrace data. Over the test  period 
I 
had at least 10  power outages from seconds to a couple of hours.  The Rb 
goes   right back to 1 E-12. It would be nice if some one  independent does 
 
a 
test on  aging, maybe I was lucky and got a  particularly  good unit.
_______________________________________________
time-nuts  mailing list -- time-nuts at febo.com
To unsubscribe, go to  
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the  instructions there.




More information about the time-nuts mailing list