[time-nuts] 5680A update

[George Dubovsky]

OK, I remember the fan controller discussion; don't know why I didn't find
it just now when I was searching this topic. Thank you very much, Bert.

geo

On Tue, Jan 17, 2012 at 11:38 AM, <EWKehren at aol.com> wrote:

> I am using a fan that holds it within .1 C Its been month since I measured
> it but I did report it here and I think it is 42.7C.
> Bert Kehren
>
>
> In a message dated 1/17/2012 11:30:07 A.M. Eastern Standard Time,
> n4ua.va at gmail.com writes:
>
> Bert,
>
> Since you have been running your unit for a long time,  what temperature
> are
> you holding your 5680 to? I suppose more to the point,  I attached my unit
> to a 1/2" think aluminum plate slightly larger than the  5680 footprint,
> and
> that in turn is attached to a painted surface of a  cabinet (no effort to
> achieve max temp transfer there). The top (hidden  mounting screw) of my
> unit stabilizes at 140 F. It locks up just fine, but  sometimes, after
> several hours, it will unlock and fail to re-lock. I was  wondering if I
> need to drop the temperature.
>
> geo
>
> On Tue, Jan  17, 2012 at 11:13 AM, <EWKehren at aol.com> wrote:
>
> > After eight  weeks of monitoring to 1 E-12, I still se no aging. Waiting
> for
> >   a change so I can do other tests. One thing I clearly se is a 4 Hz
> filter
> > response changing the output by +- 3 E-11. It may be more, will  have to
> > find a  way to check it more accurately, because of  limited response
> time.
> > I
> > for one  will fix that problem  with a Morion MV 89 and a 100 Hz analog
> > filter.
> > New   Morion's are available for less than $ 30 the ones I bought seem
> new.
> >  That's  also where I got my 5680A
> > Have no contact with the  seller.
> > Bert Kehren
> >  _______________________________________________
> > time-nuts mailing list  -- time-nuts at febo.com
> > To unsubscribe, go to
> >  https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the  instructions  there.
> >
> _______________________________________________
> time-nuts  mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the  instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>