[time-nuts] FE-5680A what is the size of the Torx??

Chuck Harris cfharris at erols.com
Tue Jan 17 21:35:45 EST 2012

Home Depot sells a little HUSKY brand screwdriver tool that
has replaceable bits.  It has all the tiny torx sizes.

The correct tool has a black end cap, and costs about $6

-Chuck Harris

Paul F. Sehorne wrote:
> I'll give that a try. In the meantime, I'll try to come up with an Torx of the
> correct size. Brian said T-7 fit his.
> On 1/17/2012 6:07 PM, Chuck Forsberg WA7KGX N2469R wrote:
>> I have a tool with a number of Allen wrenches. The smallest
>> of the lot fits the screws that hold the oscillator to the board.
>> I found it easiest to insert the tool from the other side of the
>> board rather than unscrewing the usual way. This way I
>> was able to insert the Allen wrench well into the screw yet
>> avoid interference with the oscillator box.

More information about the time-nuts mailing list