[time-nuts] FE-5680A won't lock
rbenward at verizon.net
Wed Jan 18 16:50:16 EST 2012
I got my first one from nichegeek and it took a long time to lock. Someone
suggested I adjust C217 which worked, but if I jarr the oscillator it will
go out of lock, and may or may not relock so it's still not up to 100%.
I'm going to use this as my experimental unit for EFC and the like.
Nichegeek replaced the unit without charge and did not request that I return
it (may be because I was also buying a double oven OXCO during my inquiry).
----- Original Message -----
From: "Bob Camp" <lists at rtty.us>
To: "'Discussion of precise time and frequency measurement'"
<time-nuts at febo.com>
Sent: Wednesday, January 18, 2012 12:20 PM
Subject: Re: [time-nuts] FE-5680A won't lock
> I had the same issue with one unit (out of three) from the same seller. As
> mentioned elsewhere, it locked up after about 20 or 30 minutes on power.
> seems reasonably stable and does not pull excess current on either supply
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Scott Newell
> Sent: Tuesday, January 17, 2012 11:31 PM
> To: time-nuts at febo.com
> Subject: [time-nuts] FE-5680A won't lock
> Just got my 3 in from nichegeek. Paid Thursday, shipped Friday,
> arrived this evening. Wow. (Actually arrived too quickly--I don't
> have my t-bolt running, so I can't easily do an accurate frequency check.)
> Two power up and lock in <3 minutes. One powers up, gets toasty, and
> gives 10MHz, but no lock and no PPS.
> The tuning config on all three read back as 0. I've set the problem
> child to near +/- FS and about +/- 25% of tuning range: still no lock.
> Any suggestions on what I should look for or try? I'm not quite
> ready to throw in the towel and contact the seller.
> newell N5TNL
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> and follow the instructions there.
More information about the time-nuts