[time-nuts] Leap Second decision postponed

[Azelio Boriani]

Of course I have to read the ICD200 but to collect data from the Tr I need
the Tr details. For example, the Bl command adds the SVID/frame/page to the
data and you must know how to separate the fields (it is very simple, the
are at the beginning).
OK, I know, I'll have to reverse engineer the Tr command... now I'm
collecting data and then I'll compare to the ICD.

On Fri, Jan 20, 2012 at 1:53 PM, k4cle at aol.com <k4cle at aol.com> wrote:

> You will need to consult the ICD to decipher the data.
>
> Connected by DROID on Verizon Wireless
>
> -----Original message-----
> From: Azelio Boriani <azelio.boriani at screen.it>
> To: Tom Van Baak <tvb at leapsecond.com>, Discussion of precise time and
> frequency measurement <time-nuts at febo.com>
> Sent: Fri, Jan 20, 2012 12:03:59 GMT+00:00
> Subject: Re: [time-nuts] Leap Second decision postponed
>
> Mmmmh, problem: can't find the @@Tr command details... my M12 gives a
> response for the @@Tr but at the moment I can't decode it. The Oncore VP
> has the @@Bl command but the M12 doesn't recognize it. Is the @@Tr an
> undocumented/secret command? Found a lot of PDFs on the M12 but no @@Tr in
> them.
>
> On Fri, Jan 20, 2012 at 10:08 AM, Azelio Boriani
> <azelio.boriani at screen.it>**wrote:
>
>  Yes, I was too fast, looked again and found only almanac data. I'll try on
>> my M12.
>>
>>
>> On Fri, Jan 20, 2012 at 2:04 AM, Tom Van Baak <tvb at leapsecond.com> wrote:
>>
>>  No, @@Be is just the almanac data. That is not what you want.
>>> On the M12 to get all the subframes you use @@Tr.
>>>
>>> /tvb
>>>
>>> ----- Original Message ----- From: "Azelio Boriani" <
>>> azelio.boriani at screen.it>
>>> To: "Discussion of precise time and frequency measurement" <
>>> time-nuts at febo.com>
>>> Sent: Thursday, January 19, 2012 4:14 PM
>>> Subject: Re: [time-nuts] Leap Second decision postponed
>>>
>>>
>>>  For the Motorola/iLotus receiver the command is @@Be. But the data
>>>
>>>> returned
>>>> has no such page 18 of subframe 4. Manual says subframe 4 with pages 2
>>>>
>>> to
>
>> 5, 7 to 10 or 25 and subframe 5 with pages from 1to 25.
>>>>
>>>>
>>>
>>>
>>> ______________________________****_________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to https://www.febo.com/cgi-bin/****<https://www.febo.com/cgi-bin/**>
>>>
>>>  mailman/listinfo/time-nuts<htt**ps://www.febo.com/cgi-bin/**
> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
> >
>
>> and follow the instructions there.
>>>
>>>
>>
>>  ______________________________**_________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/**
> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
> and follow the instructions there.
>
> ______________________________**_________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/**
> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
> and follow the instructions there.
>