[time-nuts] Leap Second decision postponed

[Tom Van Baak]

It's in m12-gps-bit-stream.pdf under www.leapsecond.com/pages/m12/
/tvb

  ----- Original Message ----- 
  From: Azelio Boriani 
  To: Tom Van Baak ; Discussion of precise time and frequency measurement 
  Sent: Friday, January 20, 2012 4:03 AM
  Subject: Re: [time-nuts] Leap Second decision postponed


  Mmmmh, problem: can't find the @@Tr command details... my M12 gives a response for the @@Tr but at the moment I can't decode it. The Oncore VP has the @@Bl command but the M12 doesn't recognize it. Is the @@Tr an undocumented/secret command? Found a lot of PDFs on the M12 but no @@Tr in them.


  On Fri, Jan 20, 2012 at 10:08 AM, Azelio Boriani <azelio.boriani at screen.it> wrote:

    Yes, I was too fast, looked again and found only almanac data. I'll try on my M12.



    On Fri, Jan 20, 2012 at 2:04 AM, Tom Van Baak <tvb at leapsecond.com> wrote:

      No, @@Be is just the almanac data. That is not what you want.
      On the M12 to get all the subframes you use @@Tr.

      /tvb

      ----- Original Message ----- From: "Azelio Boriani" <azelio.boriani at screen.it>
      To: "Discussion of precise time and frequency measurement" <time-nuts at febo.com>
      Sent: Thursday, January 19, 2012 4:14 PM
      Subject: Re: [time-nuts] Leap Second decision postponed



        For the Motorola/iLotus receiver the command is @@Be. But the data returned
        has no such page 18 of subframe 4. Manual says subframe 4 with pages 2 to
        5, 7 to 10 or 25 and subframe 5 with pages from 1to 25.