[time-nuts] Rapco 1804m

[Paul Flinders]

On 03/06/12 21:41, gandalfg8 at aol.com wrote:
>   I have several of these, all work well, all take some time to settle down after the control LED comes up. I can't remember now if any of mine have shown fine either but have compared all with a trio of Thundebolts and all work well as I say.
> There's a manual for the Rb version available from at least two of the UK Ebay suppliers so worth asking if you bought from there. All you need is in the manual and the Rb command set is very similar to the OCXO version but I can let you have a pdf copy of the proper OCXO version manual next week if you don't get one before then.
> I'm away from home right now and internet is very hit and miss here but will be back Wednesday.
> regards
> Nigel
> GM8PZR
With many thanks to David and Björn (both of whom can claim the beverage 
of their choice if we ever meet) I have a couple of copies of the manual 
which I'm now reading.

I did contact the vendor - twice - although to be fair the second time 
was only this morning. However, as yet, I haven't had a reply. There 
seems to be only one seller on ebay at present - pre sales and delivery 
10/10- but after sales is falling into the "6/10 could do better" category.

My current plan is a better antenna with a better position.

Thanks once again to all.