[time-nuts] Different or defective FE-5680A?

[Joseph Gray]

This one has no SMA and hasn't been modded in any way that I can tell.
It came on a cutoff circuit board, like the others.

Joe Gray
W5JG

On Fri, Jun 8, 2012 at 3:29 PM, Bob Camp <lists at rtty.us> wrote:
> Hi
>
> There is a variant that comes from the factory with no 10 MHz output at all. Industrious people in far away places drill holes and wire up SMA connectors to give them a 10 MHz output. If yours is one of those, the mod may not have been 100% effective. Maybe a loose wire ….
>
> Bob
>
> On Jun 8, 2012, at 5:21 PM, Joseph Gray wrote:
>
>> Further information. I do get a Lock (low) indication on pin-3 and a
>> PPS on pin-6. Nothing at all on pin-7.
>>
>> Joe Gray
>> W5JG
>>
>> On Fri, Jun 8, 2012 at 1:41 PM, Joseph Gray <jgray at zianet.com> wrote:
>>> Months ago, I ordered two FE-5680A units from nichgeek for my personal
>>> use. They work just fine. Recently, I ordered one for work from the
>>> same source.
>>>
>>> For the work unit, I ordered a small 15 VDC switcher and a 5 V DC-DC
>>> module from Jameco. Today, I wired it all up, using the same pinout as
>>> the previous units that I bought from nichegeek. Although the unit
>>> gets warm, I get no 10 MHz output at all on pin 7.
>>>
>>> I double checked my wiring and it is OK. I even went home and got one
>>> of my units. Plugging my home unit in place of the work unit, mine
>>> puts out a nice 10 MHz in short order.
>>>
>>> Looking closer, I see that the two units are labeled differently. Mine
>>> has a large white label that says "P/N 217400-30352-1".  On the
>>> smaller label "FE-5680A  UN 78082" and "S/N 0434-84673". The work unit
>>> is silkscreened with "PN: FE-5680A". The small label says "FE-5680A
>>> UN37915 REVISION: B" and "S/N 0226-53954".
>>>
>>> I know that there are several versions of FE-5680A, with different
>>> pinouts. I'm wondering if this latest unit is different than the two I
>>> purchased before.
>>>
>>> I've emailed nichegeek and am awaiting a reply.
>>>
>>> Joe Gray
>>> W5JG
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>