[time-nuts] Miller Divider
Bob Camp
lists at rtty.us
Thu Jun 14 14:43:07 UTC 2012
Hi
A parametric (varicap based) divider might be an alternative. There's a lot
of design information on them out there. They are pretty easy to build and
reasonably robust.
Bob
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of J. Forster
Sent: Thursday, June 14, 2012 8:37 AM
To: time-nuts at febo.com; GenRad at yahoogroups.com
Subject: [time-nuts] Miller Divider
Hi,
Has anybody had any experience with the Miller frequency divider:
input ------>- mixer ->-----o----->- output
F | | F/2
^ |
|--- LPF --|
There are more details in Wiki:
http://en.wikipedia.org/wiki/Frequency_divider
There were similar dividers used in the GR Synthesizers in the mid-1960s.
My current interest is only in the divide-by-two.
Thanks,
-J
=================
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list